SD (SDHC) Memory Card Precautions (X70)

Q: Are there any precautions needed when using SD(SDHC) Memory Cards on the X70?

A:
• Cards that are unused or that have been used on other devices, such as another camera or a computer, must first be
formatted on the PENTAX X70.
*Note that formatting a card erases all the data on the card, including protected images and sound files.
• The SD Memory Card is equipped with a write-protect switch. Setting the switch to LOCK prevents
new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the
camera or computer.
• Do not remove an SD (SDHC) Memory Card or turn the camera off while you are recording data or playing back images or
audio, or while the camera is connected to a computer via a USB cable. Doing so can result in the corruption of stored data
and/or damage to the SD (SDHC) Memory Card.
• Do not bend an SD (SDHC) Memory Card or subject it to violent impacts. And do not leave cards in locations where they will be
exposed to water, moisture, high temperatures, condensation, dust or strong magnetism is generated. Doing so can result in
the corruption of stored data and/or damage to the SD (SDHC) Memory Card.
• If a card is left unused for a long period, it may no longer be possible to read the data stored on the card. Important data should
be backed up regularly.
• Avoid using or storing the card where it may be exposed to static electricity or electrical interference.