Search
Tags

Documents Tagged with "K200D"

Displaying 1 through 20 of 20 documents

  K200D Main Specifications
Sensor Type - Interline interlace CCD with primary color filter and integrated Shake/Dust Reduction sensor movement system Size - 23.5 x 15.7mm Color depth - 8 bits/channel JPG, 12 bits/channel RAW Effective pixels - 10.2 MP Total pixels - 10.75 MP Recorded resolutions - 3872x2592 (10M), 3008x2000 (6M), 1824x1216 (2M)
TagTags: K200D
  Expand Dynamic Range and RAW Data
Q: Does the RAW data of an image recorded using the camera's Expand Dynamic Range function reflect this when using PHOTO Laboratory 3? A: Yes.The expanded dynamic range of an image is incorporated into the RAW data so you will see this when developing the image using PHOTO Laboratory 3.
TagTags: K20D K200D K2000
  PENTAX PHOTO Laboratory 3 in Full Automatic Mode
Q: Are the [Fine Sharpness] and [High-ISO Noise Reduction] set in the camera reflected when developing the RAW data using PHOTO Laboratory 3 in full automatic mode? A: No.The image processing engine that the software uses is different from that of the camera so these settings will not be reflected.
TagTags: K20D K200D K2000
  'Dust Alert' Function
Q: What is the 'Dust Alert' function? A: It is a camera function that will detect and display an image of any dust which may have adhered to the CCD sensor.This image can be saved and recalled as a guide when cleaning the sensor.
TagTags: K20D K200D K2000
  'Dust Alert' Function Not Working
Q: The 'Dust Alert' Function on this camera is not working. A: The following conditions are necessary to activate the Dust Alert function.1.The lens used is a DA or FAJ lens, or a DFA, FA or F lens that features an A (Auto) position on the aperture ring.2.If the lens features an aperture ring, it should be set to the A position.
TagTags: K20D K200D K2000
  Setting 'Expand Dynamic Range' Function
Q: How can I set the Expand Dynamic Range function?A: Press the Fn button for the [Sensitivity] setting in the Fn menu to turn this function on or off.
TagTags: K20D K200D K2000
  [AUTO] Sensitivity Cannot be Selected
Q: The [AUTO] sensitivity cannot be selected. A: When the exposure mode is set to M (Hyper-manual), B (Bulb) or X (Flash X-sync speed), the sensitivity cannot be set to [AUTO].
TagTags: K20D K200D K2000
  P.I.M. and Exif Print Support for DSLRs
Q: Does this camera support support P.I.M.(PRINT Image Matching III ™) and Exif Print (Exif 2.2)? A: JPEG images shot with this camera support both.RAW images do not.
TagTags: K20D K200D K2000
  Image not Printing from K200D to PictBridge Printer
Q: The image won't print from the K200D to a PictBridge-compatible printer with the USB cable.A: Change the camera’s [USB Connection] from [PC] to [PictBridge].Follow the procedure below to change the USB connection.Turn on the camera.Press the MENU button.Press the four-way controller (right) twice to select the [Set-up] menu.
TagTags: K200D
  Using Older Lenses on Pentax K10D, K200D, K20D
Q: Can I use older Pentax lenses on my Pentax DSLR?A: Yes.Pentax A-series lenses (with an "A" setting on the aperture ring), can be used as manual-focus lenses in all exposure modes on a Pentax DSLR.Pentax K-mount, M-series and S (screw) mount lenses without auto-aperture control (an “A” setting on the aperture ring) can be used in Manual exposure mode using stop-down metering and manual focus.
TagTags: K10D K200D K20D
  K200D Start-Up Time
Q: How long does it take the K200D to start up?A: Start-up for the K200D takes approximately 0.3 seconds from the time the power switch is turned on until the LCD panel shows the number of recordable images.(This may vary slightly depending on the SD/SDHC memory card being used).
TagTags: K200D
  K200D AA Battery Types
Q: What type of batteries can be used with the K200DA: The K200D can be powered by four AA lithium batteries, four AA Ni-MH rechargeable batteries or four AA alkaline batteries.Note: Use of AA alkaline batteries is not rcommended except for emergency use or checking the camera's functionality.
TagTags: K200D
  K200D and CR-V3 Batteries
Q: Can CR-V3 lithium-ion batteries be used with the K200D?A: No.
TagTags: K200D
  K200D and SD (SDHC) Memory Cards
Q: Are there any precautions that should be observed when using SD (SDHC) Memory Cards?A: Please observe the following precautions.Use the K200D to format (initialize) unused Memory Cards or Memory Cards that were used on another camera, on a computer or any digital device other than the K200D.Follow the procedure below.
TagTags: K200D
  K200D Focusing Screen
Q: Is the focusing screen on the K200D interchangeable? A: No.
TagTags: K200D
  Battery Grip for K200D
Q: Can the battery grip D-BG1 (for the *istD) be used with the K200D?A: No.Optional Battery Grip D-BG3 with vertical shutter release button is available for the K200D.
TagTags: K200D
  K200D Multi-exposures
Q: Does the K200D have the ability to do multi-exposures?A: No.
TagTags: K200D
  K200D Flash Sync Socket
Q: Does the K200D have a sync socket for professional flashes?A: No.Using the K200D with flash units from other manufacturers may cause equipment problems.We recommend using the PENTAX dedicated automatic flash units such as the AF200FG, AF360FGZ or AF540FGZ.
TagTags: K200D
  K200D and Wireless Flash
Q: Can wireless flash be used with the K200D? A: Yes.Wireless mode is available when using the AF540FGZ or AF360FGZ external flash.The flash used off-camera can be triggered by either the pop-up flash on the K200D or a second AF540FGZ or AF360FGZ flash mounted on the camera's hot shoe.
TagTags: K200D
  K200D and PENTAX REMOTE Assistant 3
Q: Can PENTAX REMOTE Assistant 3 be used with the K200D?A: No.The K200D is not compatible with PENTAX REMOTE Assistant 3.
TagTags: K200D