Documents Tagged with "Optio I-10"

Q: Can the Optio I-10 be mounted on a tripod? A: Yes, it can be mounted using the threaded tripod mount in the camera base.

Q: Does the Optio I-10 come with an SD or SDHC Memory Card?A: No.These will need to be purchased separately as required.Note: The camera does contain built-in memory, enough for 11 pictures at 12Mp resolution.

Q: Where is the audio microphone on the Optio I-10? Can an external microphone be connected to the camera? A: The microphone is on the top right of the camera.External microphones cannot be connected to the Optio I-10.

Q: Is there a waterproof case (underwater housing) available for the Optio I-10? A: An underwater housing for the Optio I-10 is not available and there are currently no plans to release one.

Q: What storage media is used by the Optio I-10? A: The camera has approximately 26.7 MB of built-in memory and can use either SD or SDHC memory cards or Eye-Fi cards.

Q: How big is the LCD monitor on the Optio I-10 and how many pixels does it have? A: The monitor is a 2.7-inch LCD panel, wide viewing angle with approximately 230,000 dots.

Q: Which SD (SDHC) Memory Cards are recommended for this camera? A: We recommend the SD (SDHC) Memory Card brands shown in the table below.Panasonic *SD Memory Card – Capacities: 512MB to 2GB *SDHC Memory Card – Capacities: 4GB to 32GB Toshiba *SD Memory Card – Capacities: 512MB to 2GB *SDHC Memory Card – Capacities: 4GB to 32GB SanDisk *SD Memory Card – Capacities: 512MB to 2GB *SDHC Memory Card – Capacities: 4GB to 32GB Eye-Fi Japan *Eye-Fi Memory Card – Capacities: 2GB [Eye-Fi Share], [Eye-Fi Home] and [Eye-Fi Explore] As of December 2009 * When recording a movie, using a Class 6 or faster SD (SDHC) Memory Card is recommended to allow uninterrupted recording.

Q: Can a Micro SD (SDHC) memory card be used in the Optio I-10? A: Proper camera operation cannot be guaranteed when using a Micro SD (SDHC) memory card (via a card adapter) in the Optio I-10.

Q: When the battery is removed, how long does the camera retain the date and time? And does the internal clock keep running?A: Once a new battery has been loaded and left in the camera for at least 1 day, data in the camera remains backed up for approximately 1 day when the battery is removed.The internal clock also continues to run for appoximately 1 day if the battery is removed.

Q: How long is the startup time of the Optio I-10?A: The startup time is approximately 1.7 seconds.This is the delay between the camera being turned on and the camera being ready to record (with P mode selected, the built-in flash set to Flash Off, no start-up screen, and no start-up sound selected).

Q: What is the “Eye-Fi card”? A: The Eye-Fi card is a memory card that is equipped with built-in wireless LAN.You can automatically transfer images or movies to a computer or similar device via wireless LAN using a memory card that is equipped with the wireless LAN( Eye-Fi card) function.The Optio I-10 supports the Eye-Fi card and is equipped with a function that sets Eye-Fi communication on or off.

Q: What type of battery does the Optio I-10 use? A: The rechargeable lithium-ion battery D-LI92.

Q: What is the battery life of the rechargeable lithium-ion battery D-LI92 in the Optio I-10? A: Number of still images shot: Approx.250 Playback time (Slideshow): Approx.300 minutes Movie recording time: Approx.100 minutes Audio recording time: Approx .350 minutes The battery takes a maximum of approximately 150 minutes to charge.

Q: How long is the shutter release time lag on the Optio I-10?A: The shutter release time lag is approximately 0.04 seconds.This is the time between the shutter release button being full and the camera starting image capture (with the flash set to Flash Off and the focus locked).Note: this interval occurs after the shutter button has been pressed halfway to autofocus.

Q: What is the rate of continuous shooting on the Optio I-10? A: Continuous shooting mode: Approx 1.01 frames per second (Up to 8 frames) Burst shooting mode: Approx 2.64 frames per second (Up to 6 frames) Approx 4.35 frames per second (Up to 6 frames) [With the ISO set to 3200 or 6400]* In the [Burst shooting] mode, recorded pixels is fixed at 5M (2592 x 1944).

Q: What is the Auto ISO sensitivity range of the Optio I-10? A: When the ISO setting is set to [Auto], the sensitivity automatically adjusts between ISO 64 and 800.* When [Digital SR] mode is selected, the sensitivity automatically adjusts up to ISO 6400.Recorded pixels are fixed at 5M.* When [D-Range Setting] -> [Highlight Correction] is selected, the sensitivity automatically adjusts between ISO 160 and 800.

Q: Can the ISO sensitivity be set manually on the Optio I-10? A: Yes.You can choose (80,100,200,400,800,1600,3200,6400) from the setting menu.* When sensitivities [3200] and [6400] are selected, the recorded pixels are fixed at 5M.* When [D-Range Setting] -> [Highlight Correction] is selected, the minimum ISO setting is 160 (ISO 80 and 100 are not available).

Q: Does the Optio I-10 have shake reduction? A: Yes.This camera has 2 shake reduction modes.1) SR (Shake reduction) mode: This is a CCD-shift-type SR system.2) Digital SR mode: This is a shooting mode that reduces camera shake and subject blur by automatically selecting a high camera sensitivity (up to ISO 6400) depending on the ambient brightness during shooting.

Q: Does the Optio I-10 have Shutter-priority or Aperture-priority exposure modes?A: No.

Q: Does the Optio I-10 have a noise reduction function?A: Yes.The noise reduction function operates automatically if the shutter speed is 1/4 second or slower.